Packaging registration for online sellers: LUCID, licensing and the PPWR
What online sellers must do for packaging in Germany and the EU since 12 August 2026: LUCID registration, system participation, data reports and marketplace checks.
On this page
- The law today: PPWR and VerpackDG
- Who must register
- The steps: LUCID registration, system participation, data reports
- Sellers without an establishment in Germany
- What marketplaces and fulfillment providers must check
- What an online offer must show
- What the PPWR adds later
- Checklist
- Typical mistakes
- Where Central helps
In short
- Regulation (EU) 2025/40, the Packaging and Packaging Waste Regulation (PPWR), has applied in every EU member state since 12 August 2026.
- In Germany the Verpackungsrecht-Durchführungsgesetz (VerpackDG) of 13 July 2026 replaced the Verpackungsgesetz (VerpackG) on 12 August 2026.
- A producer must register in the LUCID Packaging Register before first making packaging or packaged products available in Germany; registration is free and has no minimum quantity.
- Packaging that typically ends up with private households, including all shipping packaging of online shops, must take part in a dual system, and the same quantities must be reported in LUCID.
- Since 12 August 2026, sellers without an establishment in Germany that ship directly to end users there must appoint an authorized representative.
- Online platforms must obtain the producer's registration number and a self-certification before letting it sell, and fulfillment providers may not serve producers that are not registered.
The law today: PPWR and VerpackDG#
Two texts have applied since 12 August 2026:
- EU: Regulation (EU) 2025/40, the Packaging and Packaging Waste Regulation (PPWR), applies directly in every member state (Article 71).
- Germany: the Verpackungsrecht-Durchführungsgesetz (VerpackDG) of 13 July 2026, in English the Packaging Law Implementation Act. It replaced the Verpackungsgesetz (VerpackG, Packaging Act), which applied until 11 August 2026.
Many sellers still search for "Verpackungsgesetz" and "Verpackungslizenz". The duties behind those words remain, says the Zentrale Stelle Verpackungsregister (ZSVR): registration, system participation and data reporting. What changed is who has to fulfill them.
The PPWR separates two roles. The manufacturer answers for the packaging's conformity, with technical documentation and an EU declaration of conformity (Article 15). The producer carries extended producer responsibility in the member state where the packaging becomes waste: it registers, pays for recycling and reports.
Registrations made under the VerpackG stay valid (section 68(2) VerpackDG). System participation agreed before 12 August 2026 continues until 31 December 2026 at the latest (section 68(1)).
Who must register#
The ZSVR works in two steps. The brand comes first: a company that has packaging or packaged products made under its own name or brand is manufacturer and producer. Otherwise the producer is the first company in the German supply chain. A company abroad is the producer only when it ships directly to an end user in Germany.
| Case | Producer in Germany | Example |
|---|---|---|
| Own-brand goods made to order | You | A shop has rain jackets made and packed under its fictional brand "Northpeak" |
| Resold goods in the manufacturer's packaging, bought in Germany | The first company in the German supply chain, not you | You buy Northpeak jackets from a German wholesaler |
| The same goods imported without a German intermediary | You | You buy the jackets from a supplier in Italy or China |
| Shipping packaging with your name, logo or brand | You | Mailers printed "Northpeak" |
| Neutral shipping packaging you assemble from box, tape and filling | You | A plain box you fill and seal |
| Complete neutral packaging used unchanged | Whoever first supplied it in Germany; you, if you import it or alter it (Article 21 PPWR) | A mailing bag with a built-in adhesive strip |
| Dropshipping | Found by the same two steps; dropshipping sellers must check their partners' registration (ZSVR) | A German supplier ships to your customer |
| Fulfillment | The provider must collect your registration number and self-certification, unless it is itself the manufacturer of the shipping packaging | A warehouse packs and ships your orders |
| Seller abroad shipping to end users in Germany | The seller, with an authorized representative | A Dutch shop ships to German buyers |
Two points from the ZSVR's page for online sellers:
- Shipping packaging counts as e-commerce packaging and is always subject to system participation. Tape, labels and filling belong to it.
- For micro-enterprises (fewer than 10 employees and at most EUR 2 million in annual turnover or balance sheet total) that order branded shipping packaging from a supplier in the same member state, the supplier is manufacturer and producer.
There is no minimum quantity: the duties apply to every commercial seller, says the ZSVR.
The steps: LUCID registration, system participation, data reports#
- Register in LUCID. Before first making packaging or packaged products available in Germany, the producer registers with the ZSVR in the LUCID Packaging Register (section 6 VerpackDG). You enter company data, packaging types and every brand name; the ZSVR issues a registration number and publishes the entry. A service provider cannot register for you (section 5(1)).
- Take part in a system. For packaging that typically ends up with private households, you sign a system participation agreement with one or more dual systems before you sell, stating material type, mass and your registration number (section 7). Sellers call this the packaging license ("Verpackungslizenz"); the law says system participation ("Systembeteiligung"). It means joining a dual system that collects and recycles the packaging.
- Report the data. Each figure you give your system goes into LUCID as well, without delay (section 9(1)). Producers with less than 10 tonnes in the previous year file one annual report by 1 June instead (section 9(2)).
- File a declaration of completeness if you are large. It is due by 15 May, audited, if you reached 80 tonnes of glass, 50 tonnes of paper and cardboard, or 30 tonnes of the other materials in the previous year (section 10). Below these amounts the authority may still ask for one.
Costs. Registering and reporting in LUCID are free of charge, says the ZSVR. System participation is paid: the price depends on quantities and materials and is agreed with the system operator, not set by law. The ZSVR publishes a list of system operators and gives no prices.
Fines. Up to EUR 200,000 for missing system participation and up to EUR 100,000 for missing registration (section 66(3)).
Sellers without an establishment in Germany#
Since 12 August 2026, a company that sells packaging or packaged products directly to end users in Germany without a German establishment must appoint an authorized representative for extended producer responsibility (Article 45(3) PPWR, section 5(2) VerpackDG). The ZSVR sets out the rules:
- One representative only, mandated in writing and in German (section 5(4)).
- The representative takes over all producer duties in its own name, except the LUCID registration, which stays with you.
- You name the representative in LUCID, and the representative confirms there.
- The ZSVR publishes no list of representatives.
A German shop that ships to end users in other member states needs a representative in each of them (Article 45(3)). The Umweltbundesamt notes that this duty is under political discussion for small online sellers.
What marketplaces and fulfillment providers must check#
| Who | What they must do | Source |
|---|---|---|
| Online platforms | Before a producer may use the platform: obtain its registration number and a self-certification, and assess whether both are complete and reliable | Article 45(4) and (6) PPWR, since 12 August 2026 |
| Fulfillment providers | Check the same information at contract conclusion and suspend the service if errors stay uncorrected; no service for unregistered producers | Article 45(7) and (8) PPWR; section 13(4) VerpackDG |
| Distributors | May not make packaging available in Germany if its producer is not registered or, where required, not in a system | Section 13(3) VerpackDG |
The ZSVR offers an automated register check. It shows registration, not system participation: for that you pass on your system operator's confirmation.
Marketplaces asked for the LUCID number before the PPWR. Kaufland dates its requirement to 1 July 2022 and makes a valid number a condition for selling on Kaufland.de. eBay has sellers store the number in the account and may hide offers of sellers who do not comply. Amazon asks for the 13-digit LUCID number in its compliance portal.
What an online offer must show#
| Information | Where the law says it | Example |
|---|---|---|
| LUCID number | Neither the PPWR nor the VerpackDG asks for it in the offer; marketplaces ask for it in the seller account | Number stored in the account settings |
| Drinks in single-use packaging with a deposit: the word "EINWEG" | Section 47(1), (3) and (4) VerpackDG: in distance selling in the display media, at least as large as the price | "EINWEG" next to the price of a can |
| Drinks in reusable packaging: the word "MEHRWEG" | Section 47(2), (3) and (4) VerpackDG | "MEHRWEG" next to the price of a returnable bottle |
| Later: the information of the harmonized packaging labels, before the purchase | Article 12(5) PPWR | Sorting information on the product page |
The deposit on single-use drinks packaging is at least EUR 0.25 per container. Distance sellers must offer return options within a reasonable distance of the buyer (section 46).
What the PPWR adds later#
| From | What | Where |
|---|---|---|
| 12 August 2028, or 24 months after the implementing acts, whichever is later | A harmonized label showing the material composition, also on e-commerce packaging, and the same information before an online purchase | Article 12(1) and (5) |
| 12 February 2029, or 30 months after the implementing act, whichever is later | A label on reusable packaging, with a QR code for further information | Article 12(2) |
| 1 January 2030, or three years after the implementing acts, whichever is later | At most 50 percent empty space in e-commerce, transport and grouped packaging | Article 24 |
| After 31 December 2027 | Germany: authorization from the ZSVR for packaging not subject to system participation | Section 68(9) VerpackDG |
Checklist#
- List every packaging you send to Germany: product packaging, shipping box, tape, filling and labels.
- For each one, find the producer: brand first, then the first company in the German supply chain.
- Register in LUCID, or update your entry: brand names, packaging types, representative.
- Sign a system participation agreement and enter the same quantities in LUCID.
- Ask suppliers for the material and weight of each packaging component.
- Keep your system operator's confirmation ready for marketplaces and fulfillment providers.
- For sales to other member states, check each national register and appoint representatives.
Electrical equipment and batteries have registers of their own: see WEEE registration.
Typical mistakes#
- Registering in LUCID and stopping there. Packaging subject to system participation also needs a contract with a system and data reports.
- Reporting different figures to the system and to LUCID. The ZSVR compares both; they must match one to one.
- Forgetting tape, filling and labels. They are part of the shipping packaging.
- Assuming the supplier covered everything. Own brands and direct imports make the seller the producer.
Where Central helps#
Central does not give legal advice, does not register anyone and does not certify compliance. It researches and keeps the product data these rules ask for, such as packaging materials and weights per component, brand names and the registration numbers a producer supplies, each with sources you can check, and it holds back values the sources do not support. When a fact behind a listing changes, Central flags the texts that rely on it.
Questions
Is the German Verpackungsgesetz still in force?
No. The Verpackungsgesetz (VerpackG) applied until 11 August 2026. Since 12 August 2026 the EU Packaging and Packaging Waste Regulation (EU) 2025/40 and the German Verpackungsrecht-Durchführungsgesetz (VerpackDG) apply. Registration in LUCID, system participation and data reporting remain, and registrations made under the old law stay valid.
Does a small online shop have to register in LUCID?
Yes, if it is the producer of packaging. The Zentrale Stelle Verpackungsregister states that there is no minimum quantity for commercial sellers. Whether the shop is the producer depends on the brand on the packaging and on its place in the supply chain.
What is a packaging license (Verpackungslizenz)?
It is the everyday word for system participation (Systembeteiligung): a contract with a dual system that collects, sorts and recycles packaging from private households. The contract is separate from the LUCID registration, and both are required for packaging subject to system participation.
What does LUCID registration cost?
Nothing. According to the Zentrale Stelle Verpackungsregister, registering and submitting data reports in LUCID are free of charge. System participation costs money: the price depends on the quantities and materials of your packaging and is agreed with the system operator, not set by law.
Do I need an authorized representative to sell to Germany from abroad?
Yes, since 12 August 2026, if you have no establishment in Germany and ship packaging or packaged products directly to end users there. The representative takes over all extended producer responsibility duties in its own name, except the LUCID registration, which you make yourself.
Sources
- Regulation (EU) 2025/40 on packaging and packaging waste (PPWR), Articles 3, 12, 15, 24, 44, 45 and 71EUR-Lexchecked 20 November 2026
- Verpackungsrecht-Durchführungsgesetz (VerpackDG), sections 3, 5 to 7, 9 to 11, 13, 46, 47, 66 and 68Bundesamt für Justiz, gesetze-im-internet.dechecked 20 November 2026
- PPWR and German Packaging Law Implementation Act (VerpackDG): what is changing for youZentrale Stelle Verpackungsregister (ZSVR)checked 20 November 2026
- Distinguishing between manufacturers and producersZentrale Stelle Verpackungsregister (ZSVR)checked 20 November 2026
- Mail order companies and online retailers: what is changing with the PPWRZentrale Stelle Verpackungsregister (ZSVR)checked 20 November 2026
- Systembeteiligung für Eigenmarken und ImporteZentrale Stelle Verpackungsregister (ZSVR)checked 20 November 2026
- How to register with the LUCID Packaging RegisterZentrale Stelle Verpackungsregister (ZSVR)checked 20 November 2026
- System participationZentrale Stelle Verpackungsregister (ZSVR)checked 20 November 2026
- DatenmeldungZentrale Stelle Verpackungsregister (ZSVR)checked 20 November 2026
- Pflicht zur Vollständigkeitserklärung bei hohen VerpackungsmengenZentrale Stelle Verpackungsregister (ZSVR)checked 20 November 2026
- Help: system participation and catalogue (costs, packaging license)Zentrale Stelle Verpackungsregister (ZSVR)checked 20 November 2026
- Hilfe: Rollen und PflichtenZentrale Stelle Verpackungsregister (ZSVR)checked 20 November 2026
- At a glance: appointing an authorised representativeZentrale Stelle Verpackungsregister (ZSVR)checked 20 November 2026
- Digitally check your business partners' registration statusZentrale Stelle Verpackungsregister (ZSVR)checked 20 November 2026
- Fragen und Antworten: Verpackungen und VerpackungsabfälleUmweltbundesamtchecked 20 November 2026
- Erweiterte Herstellerverantwortung bei Verkäufen in DeutschlandeBay Help (Germany)checked 20 November 2026
- Seller University: EPR general informationKaufland Global Marketplacechecked 20 November 2026
- Einhaltung der erweiterten HerstellerverantwortungAmazon (Sell on Amazon, Germany)checked 20 November 2026